Long Stroke Detector

Long stroke detector SA-S550
It has a measuring range of 50 mm and a large tolerance, and can measure parts with large displacements and various types of workpieces.

Use advanced absolute methods for high-precision counting

• The sensor uses the optical absolute encoder method.
• Even if the power is turned off, the absolute position can be read and saved immediately.
• This eliminates the need for zero point adjustment when the power is turned on, thereby saving the time required for setup.

Automatic stop function reduces stroke overload errors

• Detect the over-travel caused by various factors and automatically output it as an error.
• When the overtravel is detected, the device will immediately stop operation to avoid unnecessary problems.

Easy-to-disassemble compact connector

• The cables use compact connectors, which can be easily connected and disassembled at your work site.
• The sensor has an L-shaped connector and a straight connector required for some applications, which provides greater flexibility.

Easily identify errors with LED indicators

For the first time, LED indicators are used for sensors. Just look at the detector, you can identify the pass/fail judgment result at a glance

1. When the ambient temperature is 20ºC.
2. When pushing down the measuring terminal 50mm vertically.
3. Only when the rubber bellows is installed correctly and not damaged.