Product Description

Product Description

Small display for IPD IPD-SC1R

-The minimum reading period is 1 sec, and up to 2048 reading values can be stored
-Each display can store 2048 readings, and one value can be read in 1 msec cycle at the fastest. After storage, it can be output by RS232C. This function can be used for shape measurement
-Multiple displays can be controlled in parallel
-When multiple displays are connected in parallel, the external signal can be used to simultaneously reset or store the data of each display simultaneously
-Multiple displays can be connected in parallel for free four arithmetic operations
-A maximum of 161 solid test data can be used for four arithmetic operations on one parent machine, such as the average of three display values, the sum of 16 display values, or the difference between the maximum and minimum values of each sub-machine, etc.

The display part can be separated, can be separated and then remotely controlled
(Requires optional IPD-SC1-DPM cable)

Up to 15 slaves can be connected in parallel at the same time + 1 parent machine, and the parent machine can be connected to RS232C to read all the slave data or perform calculations, using standard DIN rails

Type	IPD-SC1RP (Pro-camera)	IPDSC1RC (slave machine)
voltage	DC12-24V±10%
Consumption current	200mA or less
display	Polarity and six digits, mode display, red/green dual-color backlight
Display decomposition energy	0.1/1/10um (optional)
Display range	-99.9999~+99.9999mm
Quantization error	±1 digit
Reading speed	2000mm/sec (when using a 0.5um resolution detector)
Number of detector connections	1 piece
Maximum number of parallel connections	16 sets (1 pro-machine + 15 sub-machines)
Zero way	Panel keys, external signals, RS signals, etc. can be reset at any point
Preset function	Polarity and six digits
Data retention	External signal control data retention
Peak test	+P, -P, PP, (PP)/2 (+P maximum, -P minimum)
Test direction cut	+/- direction can be switched
Error function	Have
Qualified judgment power	-NG/OK/+NG
Test conditions	7 groups (key input or RS code input)
Calculation function	+/-/*/Parallel display average
RS232C	Have	no
Measured value memory	2048 data
input signal	Reset to zero, store instructions, data hold, peak clear

Control software IPD-Dview

-Condition setting management to prevent errors
-Easy 3D contour drawing
-Automatically detect data from parallel slave units
-Tabular management, calculation of the control speed, can retrieve up to 2048 test points in a circle of rotation, and then use the computer to read all the memories, and draw the outline map according to the position relationship

IPD-SC1R Small Display