How to handle cutting dust from TNC305ASL?

TNC305ASL effectively controls cutting dust through a multi-stage dust removal system:
Local extraction design: The top of the cutting chamber integrates a negative pressure extraction port, combined with a 1.1kW centrifugal fan, the wind speed can reach 15m/s, quickly sucking away the dust generated by cutting.
Filter cartridge dust collector: After large particles are intercepted by the primary filter screen, the dust enters a high-efficiency filter cartridge (filtration accuracy 0.3μm). The purification efficiency reaches 99.9%, and the emission concentration is ＜5mg/m³, complying with the "Comprehensive Emission Standard of Air Pollutants" (GB16297-1996).
Pulse cleaning function: The dust collector is equipped with an automatic pulse jet device, which back-blows the filter cartridge every 30 minutes to prevent dust clogging from causing a decrease in air volume, maintaining a continuous and efficient dust removal effect.
Dust collection bucket design: The bottom dust collection bucket has a capacity of 20L and adopts a quick-release structure. No tools are required for cleaning, and dust dumping and filter cartridge resetting can be completed within 1 minute.

Kunshan Fuze Testing Equipment Co., Ltd. provides dust removal system upgrade services, such as adding activated carbon adsorption modules to treat organic dust, or installing explosion-proof devices for aluminum-magnesium alloy cutting scenarios.